●
Select <Other> when printing reports.
●
The priority order of the output destinations is determined by the order of the selected output trays. The
priority is displayed as "1," "2," and "3."
●
Paper sizes which can be output to each output tray differ depending on optional equipment attached to the
machine, such as the finisher, etc. For more information, see Optional Equipment.
<Use Optional Output Tray>
Specify whether to use the tray of the optional equipment as the output tray.
<Tray B>
<Off>
<On>
<Tray C>
<Off>
<On>
<Menu>
Tray>
●
Set this function properly depending on the optional equipment attached. If the output tray that is not
attached is set, a paper may not be output properly.
*1
<Offset Jobs>
This enables you to shift the output for each job when multiple jobs are printed consecutively.
<Off>
<On>
<Menu>
<Off> or <On>
<Scan Settings>
Configure scan settings.
<Scanner Noise Settings>
You can set whether priority is given to scanning speed or to noise reduction when the original is scanned from
the feeder.
Setting Menu List
<Function Settings>
Select the output tray
Select <Off> or <On>
<Function Settings>
<Common>
<Paper Output Settings>
<Apply>
<Common>
<Paper Output Settings>
506
<Use Optional Output
<Offset Jobs>
Select