Creating A Network Folder - Epson ES-C380W User Manual

Required Settings for Scanning

Creating a Network Folder

Create a network folder on your computer. The computer must be connected to the same network as the scanner.
The method to set the network folder varies depending on the environment. This is an example of creating a
network folder on the desktop of a computer under the following environment.
❏ Operating system: Windows 10
❏ Location for creating shared folder: Desktop
❏ Folder path: C:\Users\xxxx\Desktop\scan_folder (create a network folder called "scan_folder" on the desktop)
1. Log in to the computer on which you want to create the network folder with a user account that has
administrator authority.
Note:
If you do not know which user account has administrator authority, check with your computer administrator.
2. Make sure that the device name (computer name) does not contain double-byte characters. Click the Windows
Start button, and then select
Note:
If there are double-byte characters in the device name, file saving may fail.
3. Check that the string displayed in Device Specifications > Device Name does not contain any double-byte
characters.
There should be no issues if the device name contains only single-byte characters. Close the screen.
Example: EPSPUB313
Important:
c
If the device name contains double-byte characters, use a computer that does not use double-byte characters or
rename the device.
If you need to change the device name, make sure you check with your computer administrator in advance as it
may affect computer management and access to resources.
>

Creating a Network Folder

Settings > System > About.
140