Setting Up The Ieee802.11K/V Or Ieee802.11R Features - Epson ES-C380W User Manual

Administrator Information
7. Enter the IP address for the primary DNS server.
Confirm the value reflected on the previous screen.
Note:
When you select Auto for the IP address assignment settings, you can select the DNS server settings from Manual or
Auto. If you cannot obtain the DNS server address automatically, select Manual and enter the DNS server address.
Then, enter the secondary DNS server address directly. If you select Auto, go to step 9.
8. Enter the IP address for the secondary DNS server.
Confirm the value reflected on the previous screen.
9. Tap Start Setup.
Setting the Proxy Server
Set up the proxy server if both of the following are true.
❏ The proxy server is built for Internet connection.
❏ When using a function in which a scanner directly connects to the Internet, such as Epson Connect service or
another company's cloud services.
1. Select Settings on the home screen.
When making settings after IP address setting, the Advanced screen is displayed. Go to step 3.
2. Select Network Settings > Advanced.
3. Select Proxy Server.
4. Select Use for Proxy Server Settings.
5. Enter the address for the proxy server by IPv4 or FQDN format.
Confirm the value reflected on the previous screen.
6. Enter the port number for the proxy server.
Confirm the value reflected on the previous screen.
7. Tap Start Setup.

Setting up the IEEE802.11k/v or IEEE802.11r Features

1. Access Web Config, and then select the Network tab > Basic.
2. Set IEEE802.11k/v or IEEE802.11r to enabled or disabled.
3. Click Next.
The setting confirmation screen is displayed.
4. Click OK.
>
Connecting the Scanner to the Network
239
>
Setting up the IEEE802.11k/v or IEEE
...