Scanning To Network Computers From The Network Interface Unit - Epson Workforce DS-860N User Manual

Parent topic:

Scanning to Network Computers from the Network Interface Unit

You can scan to a network computer directly from the Network Interface Unit. You first set up a scan job
in Document Capture Pro and then select the computer you want to send the scanned file to.
1. Start a scan job using Document Capture Pro.
2. Press the OK button on the Network Interface Unit.
3. On the LCD screen of the Network Interface Unit, select the computer you want to send the scanned
file to and press the OK button.
Note: If and your scanner is part of a workgroup, make sure the computer is part of the same
workgroup or it will not show up on the LCD screen.
4. If you set up a password in Document Capture Pro, enter the password at the prompt.
5. Select a scan job and press the OK button.
6. Press the
Your original is scanned and the file is sent to the network computer you selected.
Parent topic:
Related tasks
Scanning with Document Capture Pro
Using the Network Interface Unit
start button on the scanner.
Using the Network Interface Unit
40