Setting Up Scanning From The Control Panel (The Scan To Features) - Epson ES-C380W User Manual

Required Settings for Scanning
Related Information
"Checking the Network Connection Status" on page 232
&
Making Wi-Fi Settings by PIN Code Setup (WPS)
You can automatically connect to a wireless router by using a PIN code. You can use this method to set up if an
wireless router is capable of WPS (Wi-Fi Protected Setup). Use a computer to enter a PIN code into the wireless
router.
1. Tap on the home screen.
2. Select Wi-Fi (Recommended).
3. Tap Start Setup.
If the network connection is already set up, the connection details are displayed. Tap Change to Wi-Fi
connection. or Change Settings to change the settings.
4. Select Others > PIN Code Setup (WPS)
5. Follow the on-screen instructions.
If you want to check the network connection status for the scanner after setup is complete, see the related
information link below for details.
Note:
See the documentation provided with your wireless router for details on entering a PIN code.
Related Information
"Checking the Network Connection Status" on page 232
&
Setting Up Scanning from the Control Panel (the Scan
to Features)
You need to make several settings in advance to use the Scan to features.
See the following for the work flow to set up each feature.
"Scan to Computer Feature Work Flow" on page 100
"Scan to USB Drive Feature Work Flow" on page 100
"Scan to Cloud Feature Work Flow" on page 100
"Scan to Email Feature Work Flow" on page 102
"Scan to Network Folder/FTP Feature Work Flow" on page 102
"Scan to WSD Work Flow" on page 104
>

Setting Up Scanning from the Control Panel (the Scan to Features)

139