Using Airprint; Scanning Using Chromebook - Epson ES-C380W User Manual

Scanning
>
Scanning from a Computer
9. Change the position of the scanner according to the type of original, adjust the edge guides, and then place the
original in the ADF.
Note:
You can set Scanner Settings on the scanner's control panel.
- Double Feed Stop Timing: Set the operation to be performed when a double feed is detected.
- Paper Protection: Reduces damage to the originals by stopping scanning immediately when a feeding error occurs.
- Glass Dirt Detection: Detects dirt on the glass surface inside the scanner.
Scanning starts automatically.
10. After scanning stops, place the next original in the ADF.
Repeat this procedure until you have scanned all originals.
11. After you have scanned all originals, exit Automatic Feeding Mode.
Select Done on the scanner's control panel or press Finish on the Automatic Feeding Mode screen displayed
on your computer.
Follow the instructions of the Epson ScanSmart to save the scanned image.

Using AirPrint

AirPrint enables instant scanning from a Mac without the need to install drivers or download software.
1. Load your originals.
2. Connect the product to the same network that your Mac is connected to, or connect the product to your Mac
with a USB cable.
3. On the System Preferences screen on your Mac, click Printers & Scanners.
4. Select your scanner from the list, then click Open Scanner.
5. Select scan settings as needed, then start scanning.
Note:
For details, see the macOS User Guide.

Scanning Using Chromebook

You can scan using a Chromebook.
1. Place the originals.
2. Connect the scanner to the network that your Chromebook is connected to, or connect the scanner to your
Chromebook using a USB cable.
>
Scanning Using Chromebook
133