Registering Destinations As A Group Using Web Config - Epson ES-C380W User Manual

Required Settings for Scanning
Item
Number (Registry Number)
Name
Index Word
Type (Web Config only)
Secure Connection (Web Config only)
Communication Mode (control panel
only)
Save to
User Name
Password
Certificate Validation (Web Config
only)
Proxy Server Settings
Apply button (Web Config only)
OK button (control panel only)
Note:
Scanning to Network Folder/FTP from the scanner's control panel does not support SharePoint Online.
Click the link below for more details on using the "Scan to Network Folder/FTP" feature.
"Scan to Network Folder/FTP Feature Work Flow" on page 102

Registering Destinations as a Group Using Web Config

If the destination type is set to Email, you can register the destinations as a group.
1. Access Web Config, and then select the Scan tab > Contacts.
"How to Run Web Config in a Web Browser" on page 36
2. Select the number that you want to register, and then click Edit.
3. Select a group from Type.
>
Registering Destinations to Contacts
Settings and Explanation
Sets the number of the destination to be registered in your contacts.
Enter the name to be displayed in Contacts within 30 characters in Unicode
(UTF-16). If you do not specify this, leave it blank.
Enter the name to be used for indexing and searching Contacts within 30
characters in Unicode (UTF-16). If you do not specify this, leave it blank.
Select SharePoint(WebDAV).
Select the HTTPS (WebDAV (HTTPS)) or HTTP (WebDAV (HTTP)) according to the
file transfer protocol the server supports. Select HTTPS to allow the scanner to
communicate with security measures.
Enter the name of the destination server within 1 to 253 characters (excluding
"http://" and "https://") in Unicode (UTF-16).
Enter a user name to access a server in 30 characters or less in Unicode (UTF-16).
However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do not specify
this, leave it blank.
Enter a password to access the server within 0 to 20 characters or less in Unicode
(UTF-16). However, avoid using control characters (0x00 to 0x1f, 0x7F). If you do
not specify this, leave it blank.
The server's certificate is validated when this is enabled. This is available when
HTTPS is selected for Secure Connection.
Before setting up, you need to import the CA Certificate to the scanner.
Select whether or not to use a proxy server.
The destination is registered using the information you entered.
154
>
Registering Destinations as a Gro
...