Connecting The Scanner To An Ieee802.1X Network - Epson ES-C380W User Manual

Administrator Information
Configuring a Certificate for IPsec/IP Filtering
Configure the Client Certificate for IPsec/IP Filtering. When you set it, you can use the certificate as an
authentication method for IPsec/IP Filtering. If you want to configure the certification authority, go to CA
Certificate.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Client Certificate.
2. Import the certificate in Client Certificate.
If you have already imported a certificate published by a Certification Authority, you can copy the certificate
and use it in IPsec/IP Filtering. To copy, select the certificate from Copy From, and then click Copy.
Related Information
"How to Run Web Config in a Web Browser" on page 36
&

Connecting the Scanner to an IEEE802.1X Network

Configuring an IEEE802.1X Network
When you set IEEE802.1X to the scanner, you can use it on the network connected to a RADIUS server, a LAN
switch with authentication function, or an access point.
1. Access Web Config and then select the Network Security tab > IEEE802.1X > Basic.
2. Enter a value for each item.
If you want to use the scanner on a Wi-Fi network, click Wi-Fi Setup and select or enter an SSID.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
IEEE802.1X Network Setting Items
Items
IEEE802.1X (Wi-Fi)
Connection Method
EAP Type
>
Advanced Security Settings
The connection status of IEEE802.1X (Wi-Fi) is displayed.
The connection method of a current network is displayed.
Select an option for an authentication method between the scanner and a RADIUS server.
EAP-TLS
PEAP-TLS
PEAP/MSCHAPv2
EAP-TTLS
270
>
Connecting the Scanner to an IEEE802.1X Network
Settings and Explanation
You need to obtain and import a CA-signed certificate.
You need to configure a password.