Disabling Wsd Scan; Monitoring A Remote Scanner; Checking Information For A Remote Scanner - Epson ES-C380W User Manual

Administrator Information
3. Click Next.
The setting confirmation screen is displayed.
4. Click OK.
Related Information
"How to Run Web Config in a Web Browser" on page 36
&

Disabling WSD Scan

Note:
You can also make settings on the scanner's control panel. Select Settings >System Administration > WSD Settings.
If you do not want your computer to configure the scanner as a WSD scanning device, follow the steps below to
disable the WSD settings.
1. Access Web Config, and then select the Network Security tab > Protocol.
2. In WSD Settings, clear the Enable WSD check box.
3. Click Next.
The setting confirmation screen is displayed.
4. Click OK.
Related Information
"How to Run Web Config in a Web Browser" on page 36
&

Monitoring a Remote Scanner

Checking Information for a Remote Scanner

You can check the following information of the operating scanner from Status by using Web Config.
❏ Product Status
Check the status, product number, MAC address, etc.
❏ Network Status
Check the information of the network connection status, IP address, DNS server, etc.
❏ Usage Status
Check the first day of scanning, scanning count, and so on.
❏ Hardware Status
Check the status of each function of the scanner.
❏ Panel Snapshot
Displays a snapshot of the screen displayed on the scanner's control panel.
>

Monitoring a Remote Scanner

246
>
Checking Information for a Remote Scanner