Installing/Removing The Cover At The C-Arm Mounting; Telescoping Cover Underneath The Horizontal Carriage - Siemens SIREMOBIL Iso-C Troubleshooting Manual

24
Install the cover and tighten the screws.

Installing/removing the cover at the C-arm mounting

Remove the cover screws and remove both covers from the side.
After completing the procedure, reinstall both covers in the reverse order.

Telescoping cover underneath the horizontal carriage

Remove the four lower screws.
Slightly loosen the two front screws and remove the telescoping cover from the bottom.
SIREMOBIL Iso-C SPR2-230.840.01.01.02
08.08
Page 24 of 148
CS PS SP
Prerequisites
0
0
© Siemens, 2008
For internal use only