Page 2
The protective conductor resistance must not exceed 0.2 ohms. Additional Information These instructions apply to retrofitting a video recorder on a SIREMOBIL Iso-C system with Memoskop C / Memoskop C & MOD / Memoskop C-SUB / Memoskop C-SUB & MOD.
Page 3
Installing and setting the Video Recorder Disconnect the SIREMOBIL Iso-C line voltage cable prior to begin- CAUTION ning work. Line voltage cable Video tape recorder with 100VAC line voltage: • Connect the line wires to transformer T1, connector TI - 34 and TI - 36.
Page 4
(Perform the configuration for monitor B only by special customer request). • End the "user menu". • Switch the SIREMOBIL Iso-C off and on again to activate the new configuration. Function check • Set the video recorder to record. •...