Checking The Line Voltage On The Monitor Trolley - Siemens SIREMOBIL Iso-C Troubleshooting Manual

Line voltage adjustment

Checking the line voltage on the monitor trolley

Jumper X10 for the basic system must be disconnected.
The monitor, memory device, and other devices, if present, such as a multiformat cam-
era, video printer or video recorder, must be disconnected from the line voltage supply.
Check the secondary voltages for line voltage transformer T1 according to the table.
from test point
Transformer T1.31
Transformer T1.31
Line voltage cable
MEMOSKOP, N
Line voltage cable,
Monitor 1, N
Option: Line voltage cable,
Monitor 2, N
Option: Line voltage cable
MULTISPOT, N
Option: Line voltage cable,
Video printer, N
Option: Line voltage cable,
Video recorder, N
Option: Optical isolation, line
voltage cable, N
© Siemens, 2008
For internal use only
to test point
Transformer T1.32
Transformer T1.33
Line voltage cable
MEMOSKOP, L
Line voltage cable, Mon-
itor 1, L
Line voltage cable, Mon-
itor 2, L
Line voltage cable MUL-
TISPOT, L
Line voltage cable,
Video printer, L
Line voltage cable,
Video recorder, L
Optical isolation, line L
voltage cable
SPR2-230.840.01.01.02
08.08
Voltage
190 V ~ to 205 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
230 V ~ to 246 V ~
Page 29 of 148
CS PS SP
29
2.1
Comment
cannot be adjusted
cannot be adjusted
cannot be adjusted
cannot be adjusted
cannot be adjusted
cannot be adjusted
cannot be adjusted
cannot be adjusted
cannot be adjusted
SIREMOBIL Iso-C