Replacing Damaged Drain Fitting - Hussmann INSIGHT REACH-IN Installation & Operation Manual

REPLACING DAMAGED DRAIN FITTING

The following procedure is for the field repair of a broken drain fitting.
1. Use a drill with a 1 7/8-inch (48 mm) hole saw to drill out the bottom
of the drain fitting.
Be sure to drill completely through fitting and bottom liner.
Do not use thread sealer on drain fitting.
2. Insert adapter into drain fitting. Do NOT use thread sealer on ABS
drain fitting.
If sealer is used the ABS drain fitting may crack or leak!
(Tee should be tightened no more than 4 turns.)
Do not over-tighten threads.
HUSSMANN CORPORATION • U.S. & CANADA 1-800-922-1919 • BRIDGETON, MO 63044-2483 • MEXICO 1-800-890-2900 • WWW.HUSSMANN.COM • PN 3181178_A
Drain Fitting viewed from Inside Case
Drain Fitting
Viewed from Inside Merchandiser
Foam Bottom
Assembly
Modified
Drain Fitting
End Section view
Do NOT use Thread Sealer on Drain Fitting!
6-6
PVC Adapter
1 ½" x 1 ¼"
(38 x 32 mm)
Tee 1 1/4" TxSxS (32 mm)