Table of Contents
Advertisement
s
5-4
ErvIcE
REPLACING LED LIGHTING
To remove the front LED bar:
1 . Disconnect connector (compressor zone) .
2 . Remove cover .
3 . Remove the LED bar from the metal brackets .
4 . Remove the Cable .
To replace the front LED bar:
1 . Insert cable on in the pipe
2 . Fix the LED bar to the metal brackets
3 . Fix the diffuser
4 . Connect cable to power driver
To remove the rear LED bar:
1 . Disconnect connector (compressor zone) .
2 . Remove LED bar from plastic profile .
3 . Remove Cable .
To replace the rear LED bar:
1 . Insert cable on in the pipe .
2 . Fix LED bar to plastic profile .
3 . Connect cable to power drive .
REPLACING DRAIN HEATER
1 . Remove product and wire shelves .
2 . Disconnect heater from the connection box .
3 . Remove the rail, and separate the aluminum
from the plastic profile .
4 . Replace with new heater .
P/N 3116321_A
U.S. & Canada 1-800-922-1919 • Mexico 1-800-890-2900 • www.hussmann.com
Advertisement
Table of Contents
