Joining Instructions - Hussmann INSIGHT REACH-IN Installation & Operation Manual

JOINING INSTRUCTIONS

IRL 5-door case shown
Parts List
Item Quantity Description
(IRL / IRLN)
1. 2 Donut Gasket (1250 ft)
2. 1 Gasket, .906 x
3. 1 Gasket,
4. 1 Shoe Gasket
5. 6 Cap Screw
6. 6 Flat Washers
7. 1 Joint Trim
8. 1 Self-Drilling Screw 8-18 X
9. 1 Optional Joint Trim
A
Bumper
Bumper
Bumper
Bumper
Retainer
Retainer
Splashguard
Splashguard
SIDE vIEW
Remove bumpers; splashguards should not
be installed.
HUSSMANN CORPORATION • U.S. & CANADA 1-800-922-1919 • BRIDGETON, MO 63044-2483 • MEXICO 1-800-890-2900 • WWW.HUSSMANN.COM • PN 3181178_A
/ x 200 in.
1
2
/ x / x 600 in.
1 1
2 4
/ -18 x 1 /
5 1
16 4
/
5
16
/ HX HD
1
2
JOINING
INSTRUCTION
A
Remove joining kit and packing materials; remove shelves.
NOTE
Be sure first merchandiser has been leveled according to the main
installation instruction. Carefully unpack and inspect the joining parts
listed above to verify completeness and that there is no damage.
1
Prepare cases for joining as shown in Figure 1.
A. Packing materials, bumpers and splashguards should be
removed.
B. Remove shelves (if installed).
C. Remove display racks and pans from ends to be joined.
Remove fan plenum covers if necessary.
Splashguard brackets must be installed
before piping or wiring case.
B
1-4
C
Remove display racks and bottom pans.