Table of Contents
Advertisement
7. Disposal of batteries
The operation panel has a built-in battery in order to operate the clock even when the power is
turned OFF.
Be sure to dispose of the battery following the local laws and regulations.
[How to remove the battery]
❸
❺
Type number:
CR2450
A
❶
❷
❹
❸
Remove operation panel ❶ from the fixing
1)
base.
Detach screw ❷ from the fixing base.
Loosen screw ❸ from the rear surface of the
2)
operation panel. Detach case ❹ .
❺ is the battery for clock.
3)
Type number: CR2450
4)
Pull out the connector in the direction of A.
Detach the whole main body of battery togeth-
er with its case from the PCB. (The battery is
secure on the PCB with double-faced adhesive
tape.)
– 77 –
Advertisement
Table of Contents
