Table of Contents
Advertisement
III. INSTALLATION
WARNING :
To prevent possible accidents caused by the fall of the sewing machine, perform the work by two
persons or more when the machine is moved.
(1) Preparation for assembly of the control box
0.8 mm
At four locations
❶
❸
❷
– 5 –
1) Fix toothed washers ❷ and rubber
cushions ❸ on control box ❶ . (At four
locations)
* Tighten the toothed washers so that their
height becomes 0.8 mm.
2) Fix control box mounting plate ❹ with
plain washers ❺ and nuts ❻ . (At four
locations)
* Fix the mounting plate while fitting the
screw in the U-groove in the mounting
plate.
Advertisement
Table of Contents
