5-6. Disposal of batteries
The operation panel has a built-in battery in order to operate the clock even when the power is
turned OFF.
Be sure to dispose of the battery following the local laws and regulations.
[How to remove the battery]
❶
❷
❷
Type number: CR2450
❸
❹
A
1) Remove panel ❶ from the main body
❷
of sewing machine.
2) Loosen screw ❷ from the rear surface
of the operation panel. Detach case ❸ .
❷
3) ❹ is the battery for clock.
Type number: CR2450
4) Pull out the connector in the direction
of A. Detach the whole main body of
battery together with its case from the
PCB. (The battery is secure on the
PCB with double-faced adhesive tape.)
– 66 –