JUKI LBH-1790S Instruction Manual page 46

No.
S084 Maximum sewing speed limitation
This item sets max. speed limitation of the sewing
speed. The maximum value of data edit is equal to
the sewing speed of K007 Maximum speed limita-
tion of the memory switch data.
→ Refer to
"V-22. Memory switch data list"
p.56.
S086 Pitch of going
This item sets sewing pitch of going side of
bar-tacking shape (Shape Nos. 27, 28, 29 and 30 of
S001).
Width of going
S087
This item sets width of going side of bar-tacking
shape (Shape Nos. 27, 28, 29 and 30 of S001).
Pitch of coming
S088
This item sets sewing pitch of coming side of
bar-tacking shape (Shape Nos. 27, 28, 29 and 30 of
S001).
S089 Width of coming
This item sets width of coming side of bar-tacking
shape (Shape Nos. 27, 28, 29 and 30 of S001).
Presser foot pressure
S090
Used to set the pressure to clamp the material.
When the set value is 25, the presser foot pressure
is approximately 4 kg. When the set value is 80, the
presser foot pressure is approximately 10 kg.
S101 Sewing speed for the first bartacking sec-
tion
The sewing speed for the first bartacking section is
set with this setting item.
Sewing speed for the second bartacking
S102
section
The sewing speed for the second bartacking section
is set with this setting item.
Pattern data name
S500
Used for changing the name of pattern data.
*1 : Displayed according to the shape
*2 : Displayed when it is set to with edit. Refer to
Item
"V-12. Method of setting sewing data with/without edit"
– 43 –
Setting range Edit unit
400 to 3600 100 sti/min
0.200 to 2.500 0.025 mm
0.1 to 10.0 0.05 mm
0.200 to 2.500 0.025 mm
0.1 to 10.0 0.05 mm
20 to 80 1
400 to 3600 100 sti/min
400 to 3600 100 sti/min
– –
Remarks
–
–
–
–
–
–
*1, *2
*1, *2
–
p.37.