Table of Contents
Advertisement
5) Changing the name of pattern data.
Select "S500 Pattern data name" and press EDIT
key ❽
to enable change of the pattern data
name.
When you press ITEM SELECT key ❻
edit point will move in sequence. The character
placed between "+" and "-" is the edit position
under selection.
Press DATA CHANGE key ❼
character is being selected, the character can be
selected. Press RESET key ❸
the character which is being selected. When you
keep RESET key ❸
second, the data name can be deleted.
Change the pattern data name by carrying out the
aforementioned procedure in repetition.
As many as 14 characters can be entered for the comment but all characters are not
displayed under the input mode.
(However, You can displayed to ten characters are in uppercase alphabet.)
, the
while the
to delete
held pressed for one
– 36 –
❸
The characters that can be used for the
pattern name
A - Z, 0 - 9, ., +, -, /, #, (blank)
❽
❻
❼
Advertisement
Table of Contents
