Table of Contents
Advertisement
(4) Setting the work break time
Set the work break time that is excluded from the calculation of the progress rate for the production
support function.
As many as three work break times can be set.
1) Calling the work break time 1 setting
screen
In the state where the work break time 1 is
selected on the production parameter setting
screen, press edit key ❽
The work break time 1 setting screen is displayed
A.
2) Setting the starting time of work break
Press item select key ❻
starting time of work break hour B (minute C) in
the reverse video.
Enter the set value for the work break hour B
(minute C) by pressing data change key ❼
.
3) Setting the closing time of work break
Press item select key ❻
Change the closing hour D (minute E) of work hours by pressing data change key ❼
4) Determine the set values of work break
The set values are determined by pressing edit key ❽
parameter setting screen. If there are other work breaks, carry out setting of the work break 2 and work
break 3 by selecting them on the production parameter screen.
.
to display the
to display the closing hour D (minute E) of work break in the reverse video.
– 70 –
A
B
C
D
E
Then, the screen returns to the production
❻
❼
❽
.
Advertisement
Table of Contents
