(3) Connecting the power source cord
• Connecting the power cable
Voltage specifications are shown on the power indication tag attached on the power cable and on the
rating plate adhered on the power box. Connect the cable which matches the specifications.
(For example: In the
case of 220V)
Never use under the wrong voltage and phase.
• Connection of the single-phase power cable
Table
Control box
Green/Yellow
Light blue
Power indication tag
Brown
Brown
Green/Yellow
Plug
Light blue
Power switch
Rating plate
Power source cord
– 7 –
AC
Light
220 V
blue
-240 V
Brown
Green/
GND
Yellow