8. Winding bobbin thread
(1) Winding the bobbin
1) Set the bobbin.
Fit a bobbin fully onto the bobbin winder shaft.
Take the thread from the spool and pass it through
the guides in the numerical order as shown in
the figure, and wind the end of the thread several
times around the bobbin. Then push the bobbin
winding lever ① in the direction of the arrow mark.
2) Set the mode to the bobbin winding
mode.
Under the input state, press PRESSER and
❺
WINDER key
❻
ITEM SELECT key
3) Start bobbin winding.
Depress the pedal, and the sewing machine ro-
tates and starts winding bobbin thread.
. In this state, press
.
– 29 –
①
B
A
②
❻
③
❺