Table of Contents
Advertisement
Error code
E494
Presser size over of tie stitching at sewing start
When stitching data of tie stitching at sewing start exceeds
presser size.
E495
Presser size error (Width direction : right only)
When stitching data exceeds the size of right only of width
direction of presser.
E496
Presser size error (Width direction : left only)
When stitching data exceeds the size of left only of width
direction of presser.
E497
Presser size error (Length direction : front)
When stitching data exceeds the size of front of length
direction of presser.
E498
Presser size error (Width direction : right and left)
When stitching data exceeds the size of both right and left
of width direction of presser.
E499
Presser size error (Length direction : rear)
When stitching data exceeds the size of rear of length
direction of presser.
E703
Panel is connected to the machine other than
supposed. (Machine type error)
When machine type code of system is improper in case of
initial communication.
E704
Nonagreement of system version
When version of system software is improper in case of
initial communication.
Main shaft motor encoder defectiveness or phase-out
E730
When encoder of sewing machine motor is abnormal.
Description
– 82 –
How to recover
Place of recovery
Possible to re-en-
(During individual
ter after pressing
sewing/cycle sewing)
reset key.
Sewing data edit
screen
[S064] Tie stitching at
sewing start width
(During continuous
sewing)
Standard screen
Possible to re-en-
(During individual
ter after pressing
sewing/cycle sewing)
reset key.
Sewing data edit
screen
[S003] Knife groove
width, right or [S006]
Ratio of right and left
shapes
(During continuous
sewing)
Standard screen
Possible to re-
(During individual
enter after
sewing/cycle sewing)
pressing reset
Sewing data edit
key.
screen
[S004] Knife groove
width, left or [S006]
Ratio of right and left
shapes
(During continuous
sewing)
Standard screen
Possible to re-
Standard screen
enter after
pressing reset
key.
Possible to re-
(During individual
enter after
sewing/cycle sewing)
pressing reset
Sewing data edit
key.
screen
[S005] Overedging
width, left
(During continuous
sewing)
Standard screen
Possible to re-
(During individual
enter after
sewing/cycle sewing)
pressing reset
Sewing data edit
key.
screen
[S002] Cloth cut length
(During continuous
sewing)
Standard screen
Turn OFF the
Communication screen
power.
Turn OFF the
Communication screen
power.
Turn OFF the
power.
Advertisement
Table of Contents
