Table of Contents
Advertisement
(2) Completion of counting
The count completion screen has been factory-set to "disabled" at the time of shipment.
In order to use the count-completion screen for the sewing counter, set the memory switch U077 to
"Enable display". (Refer to
[Bobbin thread counter]
(1) How to set the No. of pcs. counter
1) Selection of kinds of counters
Press ITEM SELECT key ❻
pictograph E which indicates the counter type in
reverse video.
Press DATA CHANGE key ❼
the counter you desire from among the kinds of
counters below.
2) Changing the set value for the bobbin
thread counter
Press item select key ❻
value G for the bobbin thread counter in the
reverse video. Enter the set value to be counted
until this value is reached by pressing data
change key ❼
3) Changing the current value of the bobbin thread counter
Press item select key ❻
video. It is possible to edit the numeric value by data change key ❼
"V-21. Method of changing memory switch data"
to display the
, and select
to display the set
.
to display the current value F of the bobbin thread counter in the reverse
E
F
– 32 –
p.55.)
❻
G
❻
G
.
❼
❼
Advertisement
Table of Contents
