Table of Contents
Advertisement
No.
NAME
❶
LCD display
Various data such as pattern
No., shape, etc. are displayed.
❷
READY key
Press this key when starting
sewing.
Every time this key is pressed,
change-over of sewing ready
set state and data set state can
be performed.
❸
RESET key
Press this key when releasing
error, travelling the feed mech-
anism to its initial position,
counter resetting, etc.
❹
MODE key
This key is used for displaying
the mode screen.
❺
PRESSER
This key lifts or lowers the press-
er. When the presser goes up,
and WINDER
the needle bar travels to the ori-
key
gin and when it comes down, the
needle bar travels to the right.
This key is pressed when per-
forming bobbin winding.
❻
ITEM SE-
This key is used to select the
data No. and other kinds of
LECT key
data.
❼
DATA
This key is used to change the
pattern No. and other kinds of
CHANGE key
data.
This key is used to move the
feed forward on a stitch-by-
stitch basis.
❽
EDIT key
This key is used to display the
edit screen, to select the item
or to display the detail screen.
❾
RETURN key
This key is used to return the
screen to the previous one.
SEWING
This key is used to display the
parameter edit items related to
SPEED key
the sewing speed.
FUNCTION
No.
– 21 –
NAME
OVEREDGING
This key selects overedging width
display.
WIDTH key
Every time this key is pressed,
S005 and S006 are displayed alter-
nately.
PITCH key
This key selects pitch of parallel
section.
Every time this key is pressed,
S007 and S021 are displayed alter-
nately.
CLOTH CUT
This key selects cloth cut length
display.
LENGTH key
KNIFE GROOVE
This key is used to select the knife-
groove width correction display.
WIDTH key
Every time this key is pressed,
S003 (right) and S004 (left) are
displayed alternately.
CLEARANCE
This key selects clearance display.
Every time this key is pressed,
key
S022 (first clearance) and S023
(second clearance) are displayed
alternately.
THREAD TEN-
This key is used to select the
thread tension display.
SION key
Every time this key is pressed, the
display item is changed over as
described below:
S053 Thread tension at the left
parallel section
S055 Thread tension at the first
bartacking section
S057 Setting of needle thread ten-
sion at the start of sewing
PARAMETER
This is a short cut key that parame-
ter registration is available. Regis-
REGISTRATION
tration of shortcut to setting display
key
of an optional pattern, sewing
parameter or adjustment data is
possible. For the setting procedure,
Refer to
register key"
INFORMATION
This key is used to set and check
the production counter.
key
COPY key
Press this key when copying pat-
tern.
SET READY
It lights up under the sewing mode.
LED
FUNCTION
"V-16. Using parameter
p.47.
Advertisement
Table of Contents
