Communication - JUKI LBH-1790S Instruction Manual

27. Communication

This sewing machine is capable of inputting/outputting data by means of an USB thumb drive.
1) Entering the communication mode.
Referring to the mode screen in
edit/check the data other than sewing data"
p.45, select the communication mode.
2) Selecting the type of communication.
Press DATA CHANGE key ❼
type of communication.
Name of data
Parameter data
Vector form data
* Refer to the Engineer's Manual for how to set the vector form data.
3) Selecting the communication direction.
Press ITEM SELECT key ❻
pictograph A which shows the communication
direction selection.
Press DATA CHANGE key ❼
communication direction.
: Data shown on the operation panel is
written on the USB thumb drive.
: Data stored on the USB thumb drive is
read into the operation panel.
"V-15. How to
to select the
Extension
LBH00 ××× . EPD
VD00 ××× .VDT
to display
to select the
– 63 –
Description of data
Unique LBH sewing data form such as stitch
shape, cloth trimming length and overedging
width created with the sewing machine.
Data on needle entry points created with
the PM-1. The data form is commonly used
among JUKI sewing machine.
A
❼
❻ ❼