Table of Contents
Advertisement
5
MEMORY/CALL CHANNELS
I General
The transceiver has 500 memory channels, 50 scan edge
channels and 5 call channels for storage of often-used fre-
quencies.
Memory channels can be named with 6 characters and as-
signed to 18 banks.
D Memory/call channel contents
The following information can be programmed into memory
or call channels:
• Operating frequency (p. 19)
• Receive mode (p. 21)
• Tuning step (p. 18)
• Duplex direction (DUP or – DUP) with an offset frequency
(p. 31)
• Subaudible tone encoder, tone squelch or DTCS squelch
ON/OFF (pgs. 29, 71)
• Subaudible tone and tone squelch frequencies (p. 70)
• DTCS code with code phase mode (pgs. 65, 70)
• Memory bank (p. 41)
• Memory name (p. 39)
• Scan skip setting (p. 48)
35
D Default memory contents example
CHANNEL
• Regular memory channel
• Default memory channel example
000–499
Mch 000
(Memory
Mch 001
channel; Mch)
Mch 002
*Mch 003–499 are blank channels.
• Program scan edge channel
25 pairs (50 channels)
• Default scan edge example
0A/0B–
0A: 1110.495 MHz
24A/24B
1A: 1150.000 MHz
(Scan edge
2A: 1144.000 MHz
channel)
3A: 1430.000 MHz
1
*4A/4B–24A/24B are blank channels.
• Calling channel for amateur bands
• Can be used as regular memory channel
• Default call channel example
C0–C4
C0 151.000 MHz
(Call channel)
C1 145.000 MHz
C2 430.000 MHz
*C3 and 4 are blank channels.
DESCRIPTION
151.000 MHz
145.000 MHz
430.000 MHz
0B: 440.000 MHz
1B: 1152.000 MHz
2B: 1146.000 MHz
3B: 1440.000 MHz
1
Advertisement
Table of Contents
