Table of Contents
Advertisement
6 THE SPECIAL INPUTTING
6.1 Regarding Decimal Point Inputting
The Decimal Point Position is set in the System Flag Option. The system default value
is two digits decimal point.
When the Decimal Point is decided，at the transaction inputting the amount cannot be
entered with decimal.
E.g. user inputs the number "1234", if the decimal has 2 digits, the register will deal with
it as "12.34".
The point key can be used in the following operations:
1.
The multiplication operation at Reg mode or Training mode.
2.
The rate of -%, manual entries at Reg mode or Training mode.
3.
The stock manually entries of PLU is programmed.
6.2 Descriptors Inputting
Descriptors are programmable for Departments, PLUs, Clerks and the Welcome
/Trailer Messages.
Note: Only the descriptors of welcome message/bottom message can be blank,
others cannot.
There are two methods available to program descriptors, by character keyboard
method or by character code method.
6.2.1 Using Character Code
Steps:
1. At a descriptor field, refer to the Characters Code Chart below and type the code.
2. Each character code will be displayed as it is entered.
3. Press [subttl] key when the descriptor is completed.
Example:
To program the descriptor "APPLE", type:
(51)
Note:
The detailed usage of [C] key, [00]key, [subttl]key, and [TOTAL] key in Character
Code entering method, See the latter by
(92)
(92)
A
P
P
(52)
(91)
L
E
Character Keyboard
13
section.
Hide quick links:
Advertisement
Table of Contents
