Programming; Time And Date Preset; Department Preset - Royal 220DX Operation Manual

7 PROGRAMMING

Note:
1． All programming functions are completed in Prog mode.
2． （..）indicates the data are entered by numeric keys.
[..] indicates it is a function key.
3． During the Programming, if there is no change to the current parameters, you can
press
[subttl]
More program use circulation procedure, so quitting has two methods:
4．
[TOTAL]/[check]
Quitting and only printing the current preset parameter.
[TOTAL]:
Quitting and printing all preset parameter press
[check]:
printing

7.1 Time and Date Preset

Procedure:
[qty/time]（TIME INPUT）[subttl]（DATE INPUT）[subttl][TOTAL]
Here: Time Format: HHMM (4digits)
Date Format: (6digits) the set/print order is Month- Day -Year. If you want to change the
order into Month-Day-Year or Year-Month-Day Select appropriate status of
Bit A in Terminal Status 1 in 7.4. System Option Preset section.
The three different date formats are as follows: DD-MM-YY/YY-MM-DD/MM-DD-YY

7.2 Department Preset

These are department keys through which sales item are registered. At program mode,
simply depress on DEPTx key, and then preset the attribute, price and descriptor. If [dept
shift] key is necessary, please first depress the [dept shift] key then depress the
corresponding department key. The an example is as follows:
Operate sequence
[dept shift][DEPT 1~8]
Then program the department as follow:
[DEPTx]（FLAG）[subttl](TAX NO.) [subttl]（PRICE）[ subttl]（Descriptor）
[sub total] Skip to next department preset.
Note:
At this time, you can continue preset next department, or press [TOTAL] key for quit. After
preset department parameter you can press [check] Key for printing them.
key to skip.
.
Repeat if needed
Actual key
[DEPT9~16]=[DEPT1~8]+ 8 [DEPT10]=[dept shift][DEPT 2]
16
to interrupt the
[C] Key
Example