Table of Contents
Advertisement
6-2. Cleaning the interior of the frame
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❶
❸
Rubber
plug
1) Remove face plate ❶ .
2) Remove dust stuck the parts inside the frame
such as needle bar ❷ and presser bar ❸ with a
soft brush or a piece of soft cloth.
3) After the completion of cleaning, add grease to
the needle bar and the presser bar. Then, attach
❷
face plate ❶ .
Be sure to attach the rubber
plug back in place if you have
removed it before cleaning.
– 68 –
Advertisement
Table of Contents
