About The Usb; Insertion Position Of The Usb Thumb Drive - JUKI DDL-8000AS Instruction Manual

4-14. About the USB

WARNING :
The device to be connected to the USB port should have the rated current value or less as shown
below.
If any device rated current value of which is higher than the rated current value, the main body of the
sewing machine or the USB device connected can be damaged or malfunction.
Rated current value of the USB port
USB port on the electrical box side: Maximum rated current value of 1 A
USB port on the operation panel side: Maximum rated current value of 0.5 A

4-14-1. Insertion position of the USB thumb drive

❶
❷
❸
The USB connectors are equipped on upper section
❶ of the operation panel and electrical box ❷ .
To use a USB thumb drive, remove connector cover
❸ and insert the USB thumb drive into the USB con-
❸
nector.
* In the case a USB thumb drive is not used, the
USB connector should be protected with connec-
tor cover ❸ without exceptions.
If dust or the like enters the USB connector, a fail-
ure can be caused.
– 54 –