Table of Contents
Advertisement
No.
Item
P131
Condensation stitching
speed at the beginning of
sewing
＊
P132
Condensation solenoid
operation starting duty
＊
P133
Condensation solenoid duty
while it is in operation
＊
P134
Condensation solenoid
operation starting time
＊
P135
Condensation solenoid
operation starting angle
P136
Selection of the presser foot
operation when the power is
turned ON
P138
Function of pedal curve
selection
P139
Function of reverse feed
stitching on the way
P140
Number of stitches of
reverse feed stitching on the
way
P141
Condition to be satisfied
to enable the reverse feed
stitching on the way while
the sewing machine is at
rest
P142
Thread trimming function
after performing reverse
feed stitching on the way
P143
Sewing speed for reverse
feed stitching on the way
P145
ON/OFF of the data output
to JANET
P146
Waiting time to start opera-
tion of thread pulling cylinder
P147
Thread pulling cylinder ON
time
P148
Time until sewing starts
after turning OFF the thread
pulling cylinder
＊
P149
Back-tack solenoid ON
parameter
＊
P150
Back-tack solenoid OFF
parameter
P151
ON/OFF of the bird's nest
preventing operation
P152
Waiting time until the wiper
cylinder starts operation
P153
Wiper cylinder ON time
P154
Time until sewing starts
after turning OFF the wiper
cylinder
P159
Suction ON/OFF
P160
Suction time
＊ Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer's Manual and follow the instructions.
Description
The sewing speed for condensation stitching at the beginning of
sewing is set with this function setting item.
ON duty of the condensation solenoid when it starts operation is
set with this function setting item.
The duty of the condensation solenoid while it is in operation is
set with this function setting item.
The operation starting time for the condensation solenoid is set
with this function setting item.
The operation starting angle for the condensation solenoid is set
with this function setting item.
Operation of the presser foot when the power is turned ON is
selected with this function setting item.
0: The presser foot does not operate (It operates when the back
part of the pedal is depressed.)
1: The presser foot goes up after automatically retrieving the
origin
2: The presser foot comes down after automatically retrieving
the origin
Pedal curve is selected. (Improving pedal inching operation)
2
Sewing speed
0
The function activated when the reverse feed stitching on the way
switch is pressed is selected with this function setting item.
0: Normal back-tack function
1: Function of reverse feed stitching on the way is enabled
The number of stitches of reverse feed stitching on the way is set
with this function setting item.
The condition to be satisfied to enable the reverse feed stitching
switch while the sewing machine is at rest is set with this function
setting item.
0: Disabled while the sewing machine is at rest
1: Enabled while the sewing machine is at rest
Automatic thread trimming operation after performing the reverse
feed stitching on the way is set with this function setting item.
0: Automatic thread trimming is not performed after the comple-
tion of reverse feed stitching on the way
1: Automatic thread trimming is performed after the completion
of reverse feed stitching on the way
Sewing speed during the reverse feed stitching on the way is set
with this function setting item.
Output of data to JANET is set with this function setting item.
Waiting time until the start of operation of the (bird's nest prevent-
ing) thread pulling cylinder is set with this function setting item.
The time to turn ON the (bird's nest preventing) thread pulling
cylinder is set with this function setting item.
The waiting time required until the sewing machine starts next
sewing after turning OFF the (bird's nest preventing) thread pull-
ing cylinder is set with this function setting item.
Back-tack solenoid ON parameter
* Refer to the explanation of operation of the BT solenoid in the
Engineer's Manual for details.
Back-tack solenoid OFF parameter
* Refer to the explanation of operation of the BT solenoid in the
Engineer's Manual for details.
(Bird's nest preventing) ON/OFF of the bird's nest preventing
operation is set with this function setting item.
(Bird's nest preventing)The waiting time required until the wiper
cylinder starts operation is set with this function setting item.
(Bird's nest preventing) ON time of the wiper cylinder is set with
this function setting item.
(Bird's nest preventing) The waiting time required until the sewing
machine starts the next sewing after turning OFF the wiper cylin-
der is set with this function setting item.
(Bird's nest preventing) ON/OFF of the suction device is set with
this function setting item.
(Bird's nest preventing) Suction time is set with this function set-
ting item.
– 43 –
Level
U
S
S
S
S
U
U
1
Pedal stroke
U
U
U
U
U
S
U
U
S
S
S
U
S
U
S
S
S
Setting range
Default
0-1900
310
(sti/min)
1-80(%)
55
1-80(%)
10
10-150(ms)
115
10-359(°)
75
0-2
0
0-2
0
0-1
0
1-19
4
0-1
0
0-1
0
200-3000
1900
(sti/min)
0-9999
0
0-990
200
0-990
300
0-990
30
50-100
50
2-500
2
0-1
0
0-990(ms)
110
0-990(ms)
100
0-990(ms)
30
0-1
1
5-5000(ms)
650
Advertisement
Table of Contents
