Table of Contents
Advertisement
< Origin retrieval screen >
6) After the completion of sewing, check to make sure that the sewing machine has stopped. Then, press
power switch ❶ or ❷ (or turn EU-type power switch ❸ ) to turn it OFF.
In the case the machine is not used for a long time, remove the power plug from the plug recep-
tacle.
2) When you depress the back part of
pedal, the needle bar and the presser
lifting motor carry out their initial oper-
ation to allow the sewing machine to
start sewing.
– 14 –
If you attempt to start sew-
ing without depressing the
back part of pedal, the warn-
ing message screen shown
below will be displayed. To
prevent this, be sure to start
sewing after depressing the
back part of pedal.
Advertisement
Table of Contents
