JUKI DDL-8000AS Instruction Manual page 47

No. Item
P161 The presser foot lifting
operation ON/OFF when the
thread clamp works
P162 The angle at which the
presser foot starts going
up when the thread clamp
works.
P163 Ending angle of soft start for
the thread clamp
P164 Setting of the lifting amount
of the presser foot when the
thread clamp works
P165 Time during which the
presser foot goes up when
clamping the thread
P166 1st electric current time for
thread clamp
P167 2nd electric current value for
thread clamp (ON duty)
＊
P168 Back-tack solenoid ON
parameter
＊
P169 Back-tack solenoid ON
parameter
＊
P170 Back-tack solenoid OFF
parameter
＊ Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated. If it is necessary to
change the set value, please purchase the Engineer's Manual and follow the instructions.
No. Item
J04 Selection of language for the
audio function
J05 Audio ON/OFF function
J10 Setting of brightness of the back-
light
J11 Energy saving mode
J14 Password
No. Item
N01 Main software version
N02 Panel software version
N14 ST motor software version
N15 Number of stitches to stop the
grease counter
N20 Audio guidance version
Description
The presser foot lifting operation ON/OFF when the thread clamp
works is set with this function setting item.
0: OFF
1: ON
The angle at which the presser foot starts going up when the
thread clamp work is set with this function setting item.
The ending angle of the soft start for the thread clamp is set with
this function setting item.
* Refer to the explanation of operation of the thread clamp
solenoid in the Engineer's Manual for details.
The lifting amount of the presser foot when the thread clamp
works is set with this function setting item.
The time during which the presser foot goes up when clamping
the thread is set with this function setting item.
Period of time during which the 1st electric current is fed applied
to the thread clamp is set with this function setting item.
* Refer to the explanation of operation of the thread clamp sole-
noid in the Engineer's Manual for details.
"ON duty" is set in order to determine the 2nd electric current
value of the thread clamp * Refer to the explanation of operation
of the thread clamp solenoid in the Engineer's Manual for details.
Back-tack solenoid ON parameter
* Refer to the explanation of operation of the back-tack solenoid
in the Engineer's Manual for details.
Back-tack solenoid ON parameter
* Refer to the explanation of operation of the back-tack solenoid
in the Engineer's Manual for details.
Back-tack solenoid OFF parameter
* Refer to the explanation of operation of the back-tack solenoid
in the Engineer's Manual for details.
Description
The language for the audio function is selected with
this function setting item.
1: Chinese
2: English
3. Other language 1
4. Other language 2
ON/OFF of the audio guidance is set with this function
setting item.
0: All audio guidance is set to OFF
1: Only the panel operation guidance is enabled
2: All audio guidance is set to ON.
* When this item is set to "1", the audio guidance for
" ③ At the time of operating the sewing machine;
Guidance on the production support"
guidance" p. 28) is placed in OFF.
Brightness of the backlight is set with this function
setting item.
Time to turn OFF the backlight of LCD when the panel
is not operated is set with this function setting item.
0: The backlight is not turned OFF
1 - 20: Time to be elapsed before turning OFF the
backlight
If the password is set to a number other than "0000",
the password entry screen will be displayed before
displaying the function setting screen by pressing the
M switch.
Description
Main software version is displayed with this function
setting item.
Panel software version is displayed with this function
setting item.
Version of the stepping motor control software is dis-
played with this function setting item.
The number of stitches sewn is monitored in order to
notify the operator of the timing of replenishing grease.
Unit: (× 100,000 stitches)
When the grease counter value reaches 800,000,000
stitches, the grease shortage warning "E220" occurs.
When the grease counter value reaches 900,000,000
stitches, the grease shortage error "E221" occurs.
* The grease counter is cleared to "0" (zero).
Version of the audio guidance is displayed with this
function setting item.
– 44 –
Level Setting range
S
S
U
S
S
U
U
S
S
S
Level Setting range
U 1-4
U 0-2
("4-3. Audio
U 1-3
U 0-20(min)
S 0000-9999
Level Setting range
U
U
U
S
U
Default
0-1 0
0-359 100
0-359 340
0-500 50
1-990 20
1-990 7
0-100 69
1-200 25
1-200 40
1-200 10
Default
2
2
3
0
0
Default