Overlapped Stitching Pattern - JUKI DDL-8000AS Instruction Manual

4-5-2. Overlapped stitching pattern

Overlapped stitching pattern can be programmed.
A C
C
B
B
D
[Setting procedure of the overlapped stitching]
Display
section B
Display
section C
A : Number of stitches of normal stitching setting : 1 to 15 stitches
B : Number of stitches of reverse stitching setting : 1 to 15 stitches
C : Number of stitches of normal stitching setting : 1 to 15 stitches
D : Number of times of repetition : 1 to 15 times
1. When process D is set to 5 times, the sewing is repeated as A
→ B → C → B → C.
2. The number which exceeds 9 is indicated as follows:
A = 10, b = 11, c = 12, d = 13, E = 14, and F = 15.
❼ ❻
❹
– 31 –
❹ to enable the overlapped
1) Press
stitching pattern.
When the overlapped stitching pattern
is enabled, is displayed in the
display section C.
❼ to put the sewing
2) Press
machine to the overlapped stitching
setting state. In this state, one of the
items displayed in the display section B
flashes on and off.
3) Move the process that flashes on and
off to the process (A, B, C or D) you
want to set. Then, change the number
of stitches and the number of times with
❻
.