Led Indicators - Planet Switch User Manual

Item Interface
1 Port-1~Port-4
2 Port-5
3 USB
4 Reset Button
4-pin Terminal
5
Block
2.1.2

LED Indicators

The front panel LEDs indicates instant status of system power, PoE and PV system, management port
Link/Active, PoE power usage status and per PoE port links status, thus helping administrator to monitor and
troubleshoot when needed.
System
LED Color
PWR Green
Alarm Red
PV System Green
50W Amber
100W Amber
120W Amber
*The detection voltage will have a tolerance of +-0.7V.
PoE 10/100/1000BASE-T Interfaces (Port-1 to Port-4)
LED Color
LNK/ACT Green
PoE Amber
10/100/1000BASE-T Interfaces (Port-5)
LED Color
LNK/ACT Green
Description
4 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports with 802.af/at PoE+ injector function.
One 10/100/1000BASE-T RJ45 auto-MDI/MDI-X port.
Port-5 functions as WAN port when the operation mode of BSP-360 is configured to
"Gateway mode"
Connect the USB storage to USB port and back up the configuration file.
< 5 seconds: System reboot.
> 10 seconds: Factory default.
2 x 24V 2A DC output connector.
The output voltage is the same as battery voltage.
Maximum power output is clamped at 48W.
On To indicate BSP-360 has power.
Slow Blinks To indicate PV < 24V.*
To indicate battery Voltage ≦ LVD.*
Fast Blinks
Slow Blinks To indicate the system is "Not Charging".
Fast Blinks To indicate the battery is " Charging"
On To indicate the system consumes over 50-watt PoE power budget.
On To indicate the system consumes over 100-watt PoE power budget.
On To indicate the system consumes the total 120-watt PoE power budget.
Function
To indicate the link through that port is successfully established.
Blinks
To indicate the port is providing DC in-line power.
Lights
To indicate the connected device is not a PoE powered device (PD).
Off
Function
Blinks To indicate the link through that port is successfully established.
Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
Function
21
BSP-360