Usb Backup - Planet Switch User Manual

Object
IP Address
Counts
button
Table 4-7-1: Descriptions of the ICMP Ping Configuration Objects
Be sure the target IP address is within the same network subnet of the Renewable Energy
Switch, or you have to set up the correct gateway IP address.
4.8.2

USB Backup

This page shows the status of the USB HDD. You may save the setting file to USB HDD and load the setting
file from USB HDD as the screen in
Renewable Energy Switch.
Object
USB HDD
Save Settings to USB
HDD
Load Settings
USB HDD
button
Table 4-7-2: Descriptions of the USB Backup Configuration Objects
Description
The destination IP Address.
The time of ping.
Press this button to refresh the current Web page.
Figure 4-7-3 appears.
Figure 4-7-3: USB Backup Web Page Screen
Description
The status of USB HDD.
Press button to save setting file to USB HDD.
from
Press
Press this button to refresh the current Web page.
Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
Table 4-7-2 describes the WAN Objects Screen of
button to upload setting file from USB HDD.
71
BSP-360