Table of Contents
Advertisement
Object
Current Time
Copy Computer Time
Time Zone Select
Enable NTP Client Update
NTP Server
Apply
Reset
Refresh
Table 4-3-5: Descriptions of the Time Zone Configuration Objects
4.3.4
Geolocation
This section provides the settings of the latitude, longitude, and altitude of Renewable Energy Switch as the
screen in
Figure 4-3-8
appears.
Switch.
Object
Latitude
Longitude
Altitude
1. For security reason, please change and memorize the new password after this first setup.
2. The maximum length is 32 characters.
Description
Allow input current time information of Renewable Energy Switch.
Click "Copy Computer Time" to enter the required values automatically
according to your computer's current time and date.
Allow to select the time zone according to the current location of
Renewable Energy Switch.
Allow to disable or enable time update from NTP server of Renewable
Energy Switch.
Allow to choose one listed NTP server or assign one NTP server IP
address manually for Renewable Energy Switch.
Press this button to take effect.
Press this button to revert to previously saved values.
Press this button to refresh the current Web page.
Table 4-3-6
describes the Password Setting objects of Renewable Energy
Figure 4-3-8: Geolocation Setting Web Page Screen
Description
Allows to input the current latitude of Renewable Energy Switch.
Allows to input the current longitude of Renewable Energy Switch.
Allows to input the current altitude of Renewable Energy Switch.
Table 4-3-6: Setting the Geolocation of the Device
Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
47
BSP-360
Advertisement
Table of Contents
