Led Indicators - Planet IGS-824UPT User Manual

The IGS-824UPT also supports Force Power Mode in the Legacy
mode. If the output power of IGS-824UPT in the Legacy Mode is
less than 1 watt for 20 seconds, the Force Mode will be enabled
for 2 seconds. If the loading is still less than 1 watt, the Legacy
Mode will be enabled again.
The IGS-824UPT in the Force Mode will also provide a maximum
95-watt power to the PD. TO PREVENT THE DEVICES FROM
DAMAGE, please make sure the remote devices supports either
the Legacy or Force Mode before turning the DIP switch to the
Legacy Mode.
Only adjust the DIP switch to the desired mode before
powering on the IGS-824UPT. Power off first before changing
mode.

3.2 LED Indicators

 System
LED Color
P1 Green
P2 Green
Alarm Red
 PoE Power Usage (Unit: Watt)
LED Color
80W Amber
160W Amber
240W Amber
Lights to indicate power 1 has power.
Lights to indicate power 2 has power.
Lights to indicate either power 1 or power 2 has no power.
Blinks to indicate that the PoE usage is around 40W to
79W.
Lights to indicate the PoE usage is around/over 80W.
Blinks to indicate that the PoE usage is around 120W to
159W.
Lights to indicate the PoE usage is around/over 160W.
Blinks to indicate that the PoE usage is around 200W to
239W.
Lights to indicate the PoE usage is at the maximum.
Function
Function
7