Poe Configuration - Planet Switch User Manual

4.6.1

PoE Configuration

This section provides PoE (Power over Ethernet) Configuration and PoE output status of Renewable Energy
Switch as screen in Figure 4-6-2 appears. Table 4-6-1
Energy Switch.
Object
System PoE Admin Mode
Power Limit Mode
Power Legacy Mode
Power Supply
Power Allocation
Description
PoE Function
Schedule
Figure 4-6-2: PoE Configuration Web Page Screen
Description
Allows user to disable / enable PoE function.
Allows user to configure power limit mode, which can be chosen.
Consumption: Based on the real device power consumption where PoE
power is delivered as system default setting is in this mode.
Allocation: Users are allowed to assign how much PoE power to each port
and the system will reserve PoE power to PD.
Allows user to configure power legacy mode for PoE output
Displays PoE power supply status.
Displays the current total power consumption status.
This function provides input per port description and the available letters
are 30.
NOTE: The total maximum letters are only 800. Punctuations and others
will be counted as 5 per word, like ', ", \, < and >.
Allows user to disable or enable per port PoE function, and also allows
users to choose schedule by enabling PoE Schedule function of each port.
Indicates the scheduled profile mode. Possible profiles are:
Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
describes the PoE Configuration objects of Renewable
58
BSP-360