Table of Contents
Advertisement
Firewall
Routing Protocol
VPN Pass-through
LAN
Management
Management Interface
PoE Management
Battery Management
PLANET ONVIF IP Camera
Management
Standards Conformance
Regulatory Compliance
Standards Compliance
Industrial Renewable Energy 4-Port 10/100/1000T
NAT firewall with SPI (Stateful Packet Inspection)
Built-in NAT server supporting Port Forwarding, and DMZ
Built-in firewall with IP address/MAC address/Port/ URL filtering
Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS
protection
Static/Dynamic (RIP1 and 2) routing
PPTP, L2TP, IPSec, IPv6
Built-in DHCP server supporting static IP address distribution
Supports UPnP, Dynamic DNS
Supports IGMP Proxy
Supports 802.1d STP (Spanning Tree)
IP/MAC-based bandwidth control
Setting up of system/management functions
Web firmware upgrade
SNMP trap for alarm notification of events
Power limit by consumption and allocation
PoE admin mode
Per port power schedule
Per port power enable/disable
Power feeding priority
Current per port usage and status
Total power consumption
PD alive check
Scheduled power recycling
Current battery usage status
Low voltage cut-off protection
Fully-charged hold time protection
Supports PLANET ONVIF IP camera discovery
A maximum of four PLANET ONVIF IP cameras can be powered by one
BSP-360 switch.
Supports IP camera snapshot function in the LAN.
FCC Part 15 Class A, CE
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit Ethernet
IEEE 802.3x Flow Control and Back Pressure
IEEE 802.1D Spanning Tree Protocol
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768: UDP
RFC 791: IP
18
802.3at PoE+ Managed Ethernet Switch/Router
BSP-360
Advertisement
Table of Contents
