Table of Contents
Advertisement
Object
Power Mode
Priority
Device Class
Current Used [mA]
Power Used [W]
Power Limit [W]
Apply
Refresh
Auto-Refresh
Table 4-6-1: Descriptions of the PoE Configuration Objects
Industrial Renewable Energy 4-Port 10/100/1000T
802.3at PoE+ Managed Ethernet Switch/Router
Description
Profile1
Profile2
Profile3
Profile4
This function is available when choosing schedule on each port.
Allows user to select AT/AF compatibility mode. The default value is AT
mode.
Indicates the power inline mode.
The Priority represents PoE ports priority. There are three levels of power
priority named Low, High and Critical.
The priority is used in case the total power consumption is over the total
power budget. In this case the port with the lowest priority will be turned off,
and power is provided to the port of higher priority.
Displays PoE class level.
The IEEE 802.3af standard offers PoE class level from 1 to 3 and IEEE
802.3at standard offers the class from 1 to 4.
The Power Used shows how much current the PD currently is using.
The Power Used shows how much power the PD currently is using
It can limit the port PoE supply watts. Per port maximum value must be less
than 36 watts. Total port values must be less than the Power Reservation
value. Once power overload is detected, the port will auto shut down and
keep in detection mode until PD's power consumption is lower than the
power limit value.
Press this button to take effect.
Press this button to refresh the current Web page.
Check this box to refresh the page automatically. Automatic refresh occurs
every 3 seconds.
59
BSP-360
Advertisement
Table of Contents
