Menu Overview; Using The Menu Screens - Extron electronics FOX3 SR 301 User Manual

Menu Overview

In the on-screen menu, the product name is displayed at the top of the right column. The
active input and output resolutions are displayed in the bottom border. The on-screen menu
contains two submenus with various adjustable settings or device information (see the
Submenus table).
Submenus
Submenu Items

Using the Menu Screens

To open the on-screen menu:
1.
Connect a display device to the
HDMI output (see
page 5).
2. Press the MENU or ENTER button to
open the on-screen menu.
To navigate the on-screen menu:
1. Press the  and  buttons to
move through the submenus (left)
panel. The table on the previous
page shows the two submenus and
the items they contain.
2. Press ENTER or  to select a
submenu and display its items in
the right panel.
3. Press the  and  buttons to
move the blue selection border to
the desired submenu item (see the
example at right).
4. Press ENTER to select the item.
5. Press the  button to return to the list of submenus in the left panel.
To adjust the settings of a submenu item:
1. Navigate to a submenu item and press the ENTER or  button to select the item.
2. Press the  and  buttons to adjust the setting or select a specific adjustable setting
within the selected submenu item.
If the selected submenu item has multiple adjustable settings, press the  and 
buttons to select a value.
DEVICE INFO
Unit Name
Firmware
Temperature
Input
Format
Signal
HDCP
Output
Format
Display
HDCP
figure 2 on
Figure 11.
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Operation
QUICK SETUP
Output Rate
HDMI Format
Test Pattern
Factory Reset
On-screen Menu
14