Usb Hid And Usb 2.0 Connectors - Extron electronics FOX3 SR 301 User Manual

USB HID and USB 2.0 Connectors

NOTES:
L Laptop t
USB USB
~
100-240V 0.7A MAX
INPUTS
L R
HDMI
USB HID
USB 2.0
AUDIO
L R LOOP OUT
HOST HOST
50-60 Hz
Transmitter
A A A
Figure 8.
A
B
Types of USB ports
•
•
The FOX3 matrix switches the USB HID and USB 2.0 inputs and outputs
•
independently of the video and each USB connection.
• The USB 2.0 port is only available on the FOX3 SR 301 devices.
• The USB HID ports are used only for a mouse or keyboard.
• The USB 2.0 ports are used for thumb drives, cameras, keyboards, a mouse, CAC
reader, and such devices.
RS-232 IR
Tx Rx G Tx Rx OUTPUTS
3D A B
REMOTE
LAN
SYNC
RS-232
R
Tx Rx G S 5V
OUT IN OUT IN
Peripheral USB Connections Diagram
USB Host ports — Connect USB type A to B cable between these USB type B ports
and the USB ports of a host.
Two separate USB cables are required: 1 for USB HID and another 1 for USB 2.0
connections.
USB Device ports — Connect a USB type A cable between the USB type A port and
peripherals.
USB HID — Connect USB type A to B cables between this USB type B port and the
USB port of a host. The USB HID ports are used only for a mouse or keyboard.
USB 2.0 (FOX3 SR 301 only) — Connect USB type A to B cables between this USB
type B port and the USB port of a host. The USB 2.0 ports are used for thumb drives,
cameras, keyboards, a mouse, CAC reader, and such devices.
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Installation
Keyboard y
USB
~
0.7A MAX
100-240V
OUTPUTS
L R
DEVICES
USB HID
1
AUDIO
USB 2.0
L R
2 1
100 mA 500 mA
50-60 Hz
Receiver
B B B
USB
Thumb Drive
SM or MM cable
Mouse
USB
RS-232 IR
Tx Rx G Tx Rx
INPUTS
A B
REMOTE 3D
LAN
SYNC
RS-232
HDMI Tx Rx G S 5V
OUT IN OUT IN
R
11