Table of Contents
Advertisement
Date and Time Panel
The Date and Time panel (see figure 35,
set the date and time, the current date, and time. There are three options to set the date
and time: manual mode, sync to NTP (Network Time Protocol) servers, and sync to the
connected PC.
To set the date and time in Manual mode:
1.
Click EDIT in the Date and Time panel.
The editable fields are displayed (see
figure 36).
2.
Select the Manual radio button.
3.
Edit the Date/Time as desired by typing in
the date and time or using the calendar and
clock.
4.
Edit the Timezone as desired, using the
drop-down list.
5.
When finished editing, click SAVE to confirm
your changes or CANCEL to close the
window without making changes.
6.
Alternatively, click SYNC TO PC to set the
date and time according to your PC.
To set the date and time in sync to NTP
servers mode:
1.
Click EDIT in the Date and Time panel. The
editable fields are displayed (see figure 37).
2.
Select the Sync to NTP Servers radio
button.
3.
Edit the Time Zone as desired, using the
drop-down list.
4.
Click in an NTP Server field and enter the
IP address or host name of a desired NTP
server.
5.
When finished editing, click SAVE to confirm
your changes or CANCEL to close the
window without making changes.
To sync the date and time with your PC:
Click SYNC TO PC to set the date and time
according to your PC.
3
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Internal Web Page
on page 42) displays the mode used to
Figure 36.
Manual Mode
Figure 37.
Sync to NTP Servers
Mode
43
Advertisement
Table of Contents
