Table of Contents
Advertisement
Passwords Panel
The Passwords panel (see figure 35,
passwords have been set and provides an option to set administrator or user passwords. It
does not display the actual password.
NOTE: The following rules apply to passwords:
•
Length is 1 to 128 characters.
•
All human-readable characters are permitted except |.
•
The password cannot be a single space.
•
Passwords are case-sensitive.
•
The factory configured passwords for all accounts on this device have been set to
the device serial number. In the event of a complete system reset, the passwords
convert to the default, which is extron.
To assign administrator and user passwords:
1.
In the Passwords panel, click EDIT. The
editable fields are displayed (see figure 39).
2.
Click in the Admin Password field and
enter the new administrator password.
3.
Click in the Confirm Admin Password
field and enter the password from the
Admin Password field.
4.
To assign a user password, repeat steps
2 and 3 in the User Password panel (see
figure 40).
5.
When finished, click SAVE to set the
passwords. To close the window without
saving a password, click CANCEL.
NOTE: Passwords can be changed but
they cannot be removed entirely. The
FOX3 must have passwords at all times.
These fields cannot be blank.
LinkLicense Panel
The LinkLicense panel (see figure 35,
applied to the FOX3 device. A LinkLicense can be uploaded using the Extron Toolbelt
software (see
NOTE: A user must have an Insider Account to download and use ToolBelt Software.
Contact an Extron support representative, to obtain an Insider Account.
Figure 41.
5
Software/Firmware Installation
LinkLicense Panel
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Internal Web Page
on page 42) displays whether Admin and User
Figure 39.
Admin Password Panel
Figure 40.
User Password Panel
) displays information about any LinkLicense
6
on page 32 to download the software).
45
Advertisement
Table of Contents
