Table of Contents
Advertisement
Internal Web Page
The FOX3 SR 301 and FOX3 SR 311 scaling receivers feature an internal web server,
displayed as a web page. Monitor and adjust certain settings of the FOX3 SR devices via a
LAN or WAN connection. Use a web browser to view the pages on a PC connected to the
device LAN port or front panel USB port.
This section gives an overview of the internal web page, which is always available and
cannot be erased or overwritten. Topics in this section include:
•
•
Accessing the Internal Web Page
Access the FOX3 receiver internal web page as follows:
1.
2.
3.
4.
5.
6.
Accessing the Internal Web Page
Web Page Panels
Connect the FOX3 device to a LAN or WAN using the rear panel RJ-45 LAN port or the
figure 2
front panel USB port (see
Open a web browser on a PC connected on the same LAN or WAN or connected to
the front panel USB port.
NOTE: Compatible web browsers are Microsoft
Chrome™, and Apple
®
Enter the FOX3 scaling receiver IP address in the browser Address field.
NOTE: If the local system administrators have not changed the value, the
factory-specified default is 192.168.254.254 for the rear panel LAN port or
203.0.113.22 for the front panel USB port.
Press the <Enter> key on the keyboard. The web page password page opens.
Figure 34.
Network Password Prompt
The FOX3 is password protected. Enter a user name entry (user or admin) in the
Username field and the password in the Password field when prompted (see figure 34).
NOTE: The factory configured passwords for all accounts on this device have
been set to the device serial number. In the event of a complete system reset, the
passwords convert to the default, which is extron.
Click the SIGN IN button, if the unit is password protected.
FOX3 SR 301 and FOX3 SR 311 Scaling Receivers • Internal Web Page
figure 9
on page 5 and
Edge
®
Safari
.
®
on page 12).
, Modzilla
Firefox
, Google
®
®
®
41
Advertisement
Table of Contents
