General; Assembly - Vulcan-Hart VFRY Series Installation And Operational Manual

VK / TR / VFRY SERIES GAS FRYERS
The KleenScreen PLUS® filtration system filters the oil as it is pumped back into its' respective
tank(s). Only one tank can be drained and filtered at a time. Under no circumstances should both
tanks be drained at the same time.
•
After unpacking, wash the filter pan, crumb basket and filter screen assembly. Make sure
you remove the insert located inside the filter screen. Use dishwashing detergent and warm
water, (parts are dishwasher safe). Rinse the filter pan, crumb basket and filter screen
components completely and wipe all parts dry with a clean cloth.
•
Pull out the filter drawer all the way leaving the filter pan opening exposed.
•
Place the filter tank into the filter drawer making sure that the pins on the bottom of the filter
pan line up with the holes in the filter drawer. Position the filter screen assembly into the
suction tube clip in the filter pan positioning the filter screen assembly flat on the bottom of
the filter pan.
•
Carefully line up the suction tube nozzle so that it mates with the oil receptacle block
mounted on the frame of the fryer battery. Close the drawer. See Figures 1, 2 3 and 4
Filter Screen
Knurled Bottom
Fitting
VULCAN
KleenScreen Plus® Filtration System

General

Assembly

Suction Tube
Fig. 1
Filter Insert
F-32971 Rev.U (12-17)