Table of Contents
Advertisement
INTRODUCTION
This manual is for the VMCS Heavy Duty Electric
Griddle Top. Procedures in this manual will apply to
all models listed on the cover page unless specified.
All of the information, illustrations and specifications
contained in this manual are based on the latest
product information available at the time of release.
OPERATION AND FIELD
INSTALLATION
For detailed field installation, operation and cleaning
instructions refer to F47658 Operation & Field
Installation Manual sent with each unit. The manual
is also available online at www.vulcanequipment.com.
MODELS
Models
*Rapid Recovery™ composite griddle
VMCS-101
plate cooking surface, 208V
*Rapid Recovery™ composite griddle
VMCS-102
plate cooking surface, 240V
Optional, Grooved steel griddle plate
VMCS-201
cooking surface, 208V
Optional, Grooved steel griddle plate
VMCS-202
cooking surface, 240V
*9⁄16" (15mm) thick fully welded Rapid Recovery
composite griddle plate (aluminum core interior with
304 Series stainless steel exterior) for fast
temperature recovery and even heating.
SPECIFICATIONS
ELECTRICAL
Model
Voltage
VMCS-101 208V
VMCS-102 240V
VMCS-201 208V
VMCS-202 240V
VMCS HEAVY DUTY ELECTRIC GRIDDLE TOP - GENERAL
GENERAL
1 Phase
Power
AMP Draw
3.6 kW
17.3
3.6 kW
15.0
3.6 kW
17.3
3.6 kW
15.0
•
Standard set of hand tools.
•
Temperature tester with surface probe.
•
VOM with ability to measure micro amp current.
VOM with minimum of NFPA-70E CAT III 600V,
UL/CSA/TUV listed. Sensitivity of at least 20,000
ohms per volt. Meter leads must also be rated at
CAT III 600V.
•
Clamp on type amp meter with minimum of
NFPA-70E CAT III 600V, UL/CSA/TUV listed, for
measuring heating element current draw.
Special
•
Torque Wrench - Capable of measuring 20 in-lb.
•
Loctite® 242™
Page 3 of 19
TOOLS
F45571 (0316)
Advertisement
Table of Contents
